Table of Contents
Advertisement
11b/g Wireless Outdoor Multi-Client Bridge/AP
Version 1.0
Ensure that you have downloaded the appropriate firmware from the vendor's
website. Connect the device to your PC using an Ethernet cable, as the firmware
cannot be upgraded using the wireless interface.
Click on the Browse button to select the firmware and then click on the Upload
button.
The above dialog box requests you to confirm the upgrade process. Click on the OK
button to continue.
Once you click on the OK button, you will return to the previous page which indicates
that the upgrade process may take up to one minute.
After a few seconds the firmware will start to re-program the device and you will see
a countdown on the Success page.
35
Advertisement
Table of Contents
