Table of Contents
Advertisement
F
6
• Fit a
3
/
"-16 lock nut, rounded side out, onto the front axle.
8
IMPORTANT! Tighten the lock nut firmly with the closed end of the
assembly tool.
• Repeat steps 4-6 to assemble the other washer, bushing, front wheel
and wheel cover with the remaining
Hubcaps
7
• Align the slot in a hubcap with the rib in the wheel cover. "Snap" a
hubcap into the center of each wheel cover.
• Turn the vehicle upright.
10
ASSEMBLY
Assembly
Tool
Lock Nut
3
/
"-16 lock nut.
8
Hubcaps
8
FRONT VIEW
• Insert six #8 x
3
/
" screws into the front bumper and tighten.
4
Mirror
Mirror Cover
9
• Fit a mirror and mirror cover to an end of the dash assembly.
• Insert two #8 x
3
/
" screws into the mirror cover and tighten.
4
• Repeat this procedure to attached the other mirror and mirror cover
to the opposite end of the dash assembly.
Dash Assembly
J4390pr-0920
E
Hide quick links:
Advertisement
Table of Contents
