Detailed Command Descriptions - Comtech EF Data Radyne DM240XR Installation And Operation Manual

DM240XR High-Speed Digital Modulator
Terrestrial Interface Type
Terrestrial Framing
Carrier Set Roll Off
Output Clock Source
Symbol Rate
AASI NULL PID (w/IPSat interface card only)
IPSat Burst Demod Count (w/IPSat interface card only)
IPSat Control PID (w/IPSat interface card only)
IPSat Enable (w/IPSat interface card only)
Command PCR Restamping
Command Multi-PIIC Configuration (w/Multi-PIIC Interface
Card only)
Command Terrestrial COP3 Ethernet Configuration
Clear Terrestrial COP3 Ethernet Configuration
Command Pilot Symbols
Command Clear Latched Alarms
Command Set Time
Command Set Date
Command Set Time and Date
Command RF Switch Redundancy Mode (w/RF Switch
hardware only)
Command RF Switch Fault Test (w/RF Switch hardware only)
Command RF Switch Activate Side (w/RF Switch hardware
only)
9.3

Detailed Command Descriptions

Opcode: <2400h>
<1> Number of
Nonvol bytes
<4> IF Frequency
<2> Reserved
<4> Data Rate
<4> External
Reference
MN-DM240XR– Revision 12
(Query Mod All) Query a Modulator's Configuration and Status
Query Response
Configuration Bytes
Binary Value, units Hz in 100Hz steps.
50000000Hz to 180000000Hz 70/140
950000000Hz to 2050000000Hz L-Band
TBD
Binary Value, 1bps steps
Binary Value, units Hz in 8000Hz steps, e.g. 1000000Hz,
1008000Hz, etc.
256000Hz to 10000000Hz
Remote Operations
2621h
2640h
2641h
2642h
2643h
2656h
2657h
2658h
2659h
265Bh
265Ch
2B52h
2B53h
2B54h
2C03h
2C04h
2C05h
2C06h
2F40h
2F41h
2F42h
9–3