LG SolarDOM MP-9485S Service Manual page 16

K. C-MOTOR, THERMISTOR
REMOVAL
1) Remove controller assembly.
2) Disconnect the leadwire from the circulation motor
terminal and oven thermostat.
3) Remove three screws of the air tunnel - U and
lift it up.
4) Remove the screws of the thermistor, guide assy-
chamber and lift up the guide assy-chamber.
5) Remove a hex nut securing the circulation fan to
shaft of the C-motor.
6) Remove screws securing the motor shaft to the
guide assy-chamber.
7) Remove hex nut securing the C-motor to the motor
shaft.
L. INTERLOCK SYSTEM
1) INTERLOCK MECHANISM
The door lock mechanism is a device which has
been specially designed to eliminate completely
microwave activity when the door is opened during
cooking and thus to prevent the danger resulting
from the microwave leakage.
2) MOUNTING OF THE PRIMARY/MONITOR/
SECONDARY SWITCHES TO THE LATCH BOARD
3) INSTALLATION AND ADJUSTMENT OF THE
LATCH BOARD TO THE OVEN ASSEMBLY
• Mount the latch board to the oven assembly.
• Adjust the latch board in the arrow direction so that
oven door will not have any play in it when the door
is closed.
• Tighten the mounting screw.
5-6