Cd Ripping; Ripping Cd To Usb Or Mp3 Player; Speed; Source - RCA RTD209 User Manual

RTD209 EN 26/4/06

CD Ripping

Ripping to the USB device or the mp3 player are basically the same. Connect the USB device or
mp3 player first before ripping.
Note: CD Ripping function only supports CDDA discs.

Ripping CD to USB or mp3 Player

EN
1. During CD playback, press REC on the remote to activate the Ripping Menu.
2. Select one of the menu itmes using the up/down arrow buttons. Press the left/right arrow
buttons or OK to change the setting.

Speed

High speed ripping mode can save time when ripping from CDs. Select 1x(normal speed) or
2x(double speed). Press the down arrow button to move to the next menu item.
Note: No sound will be heard during ripping if you select 2x.

Source

You can select to rip one track(TRACK), the whole disc(DISC) or programed tracks(PROG TRACK).
Press OK to confirm selection. Press the down arrow button to move to the next menu item.

Destination

Select the destination of the ripped files. You can select to rip the files to the mp3 player (the Lyra
mp3 Player) or your USB device (USB).
Note: CD Ripping function does not support ripping files to Mulit Card Reader via USB port.

Start Ripping CD

CD RIPPING MENU
SPEED: 1X
SOURCE: ALL TRACKS
DESTINATION: LYRA
TRACK06 01/02
TOTAL
bars will be identical if there is only one track to rip.
Note: You can select ripping speed even after ripping is started by pressing the left/right arrow buttons.
"DEVICE REMAIN" indicates the total remaining time of the Lyra mp3 Player or the USB device.
To stop ripping during the process, highlight STOP button and press OK.
When ripping has finished, press REC to quit the ripping menu.

File Names of Ripped Files

You can find the ripped files saved in a folder named "CDRECORD" with file name as "CDTKxx01",
"CDTKxx02"...etc.

Deleting Files

[ \ ]008_AP-1.MP3
01 . \
ARE YOU SURE YOU WANT
02 . \
03 . \
TO DELETE IT?
RETURN TO ORIGINAL
SETTING IN 10
YES
20
Illustrations contained in this document are for representation only.
3:21 PM Page 24
Highlight START and press OK to start ripping.
Note: "NO USB DEVICE" will be displayed if no USB device is connected
to the unit.
DEVICE REMAIN
"NO PROGRAM TRACK" will be displayed if no program list is created.
02:14:31
"USB DEVICE IS FULL" will be displayed if the USB device is full.
"USB WRITE PROTECT" will be displayed if the USB device is write-
01:23 50%
protected. You should switch off the write protection first.
25%
The screen on the right appears when ripping start. The
first progress bar represents the progress percentage of
STOP
the current ripping track while the second progress bar
represents the total percentage. The percentage of both
In USB or mp3 player mode, select the unwanted files by
pressing the up/down arrow buttons. Press and hold CLEAR on
01 . 008 _ AP~1 remote to delete files and select YES to confirm deletion.
02 . D_MEME~1
03 . SKINNY~1
04 . WEWILL~1
SECONDS.
NO