Optoma HD65 Service Manual page 18

2-13 Disassemble Lamp
Driver
1. Unscrew 2 screws to disassemble Iron
Cut.
2. Unplug 1 connector to disassemble 5 pin
cable.
3. Take off EMI Foil Copper to separate
Sheetmetal and Sheetmetal protector.
4. Unscrew 4 screws to separate Lamp
Driver and Lamp Driver Holder.
5. Take off Lamp Driver Thermal Pad.
Note: - When you paste the Thermal Pad,you
should make sure it's edge along with
the red line.
HD65/GT-7000/HD700X Confidential 2-