Disassemble Disassemble Main Board Module - Optoma EX330 Service Manual

2-9 Disassemble Main Board
Module
1. Unscrew 2 screws (as red circle) and
Unplug 9 connectors(as yellow square)
to disassemble Main Board.
Note: - The quantity of connector are writed in
each square.
- Make sure cables plug into the correct
ports when assembling the unit.
- Make sure cables plug into the correct
ports when assembling the unit.
2-10 Separate Main Board
and Rear Cover
1. Unscrew 1 screw (as red circle) and
unscrew 2 screws (as yellow circle)
to separate Main Board and Rear Cover.
EX330/EW330/EX330(1W)/EW330(1W)
1
4
1
1
Confidential
2
2-