Table of Contents
Advertisement
Installation
3.2.1
Shock Feet
Maxtor Atlas 15K hard disk drives are outfitted with plastic shock feet on the
bottom edge of the base casting, near the corners, beneath the side mounting holes
(translucent), and near the corners of the top cover next to the screws (black). The
shock feet give an additional level of isolation to prevent the head and disk damage
that occasionally occurs during unpacking, staging, and installation. The shock feet
attenuate the short-pulse shocks that occur when placing the drive on a hard
surface.To provide optimal protection the shock feet are designed to exceed the
form factor when uncompressed.
3.3
UNPACKING INSTRUCTIONS
CAUTION: The maximum limits for physical shock can be exceeded if
1. Open the shipping container and remove the packing assembly that contains
the drive.
2. Remove the drive from the packing assembly.
CAUTION: During shipment and handling, the antistatic electrostatic
3. When you are ready to install the drive, remove it from the ESD bag.
3-4
Maxtor Atlas 15K
the drive is not handled properly. Special care should be
taken not to bump or drop the drive.
discharge (ESD) bag prevents electronic component damage
due to electrostatic discharge. To avoid accidental damage to
the drive, do not use a sharp instrument to open the ESD bag.
Save the packing materials for possible future use.
Advertisement
Table of Contents
