Seagate ST318436LW Product Manual page 70

60
Supported Conditions or feature
Y Read look ahead crossing cylinder boundaries
N Relative addressing—customer unique options
Y Reporting actual retry count in Extended Sense bytes 15, 16 and 17.
Y Reset condition
Y RPS (rotational position seek/sort)
Y S2 bit
SCA-2 SCA connector (optional)
Y SCSI ID accessibility to front end (J6)
Y SCSI-3 SPI compliant
Y Variable Sector size, 512 to 4,096 in 2 byte multiples
Y Segmented caching
Y S.M.A.R.T. (Self-Monitoring Analysis and Reporting Technology)
N Sparing scheme per cylinder
N Sparing scheme per track
N Sparing scheme per volume
Y Sparing scheme per zone
Y Strict bit support
Y Sustained transfer rate of 3 Mbytes/sec.—single-ended
N Sync spindles—rotational position offset
N Synchronized (locked) spindle operation
Y Synchronous data transfer
Y Tagged command queuing 64 deep
Y Target initiated SDTR
N TTD/CIOP
Y Ultra SCSI, 20 Mbytes/sec.
Y Ultra-2 SCSI, 40 Mbytes/sec.
Y Ultra160 SCSI, 80 Mbytes/sec. (LVD, single transition only)
Y Ultra160 SCSI, 160 Mbytes/sec. (LVD, double transition only)
Y Write protected
N Zero latency read
Supported Status supported
Y Good
Y Check condition
Y Condition met/good
Y Busy
Y Intermediate/good
Y Intermediate/condition met/good
Y Reservation conflict
Y Queue full
N Auto contingent allegiance active
Barracuda 18XL Product Manual, Rev. A