Introduction About your headset With the Nokia Essence Bluetooth Stereo Headset, you can handle calls hands-free and listen to music on the go. Active noise cancellation (ANC) helps you enjoy high audio quality also in noisy environments. The headset is easy to pair with compatible phones.
This device is compliant with Bluetooth Specification 2.1 + EDR supporting the following profiles: Headset Profile (HSP) 1.2, Hands-Free Profile (HFP) 1.5, Advanced Audio Distribution Profile (A2DP) 1.2, and Audio Video Remote Control Profile (AVRCP) 1.0. Check with the manufacturers of other devices to determine their compatibility with this device.
14 Near Field Communication (NFC) area Charge the battery Before using the headset, you must charge the battery. When you unplug a charger, hold and pull the plug, not the cord. Connect the charger to a wall outlet. Connect the charger cable to the charger connector on the headset. The red indicator light turns green when the battery is fully charged.
Switch the headset on or off To switch the headset on, press and hold for 2 seconds. The headset beeps, and a green indicator light flashes once. The headset automatically connects to the last connected device. If you have never paired the headset with a device, or you have cleared the paired devices list, pairing mode is automatically activated.
Page 6
Pair the headset manually Make sure the headset is switched off. Switch the compatible device on, and activate the Bluetooth feature on the device. Switch the headset on. If you have previously paired your headset with another device, press for 5 seconds. The blue indicator light starts to flash quickly. Set your device to search for Bluetooth devices.
The paired devices list on your headset can contain up to 8 devices. You can connect the headset to 2 compatible devices at the same time: 1 mobile device and 1 music player. Connect the headset to the last used device manually If no other device is connected, press and hold for 2 seconds.
Listen to music Play music Take your favourite music with you. Your headset reduces background noise, leaving you free to enjoy the music. The headset must be paired and connected to a mobile device that supports the A2DP Bluetooth profile and has a music player feature, or to a compatible music player that supports this profile.
Boost the low frequency sounds Press the bass key. Boost the high frequency sounds Press the treble key. You can boost both high and low frequency sounds at the same time. When you are listening to music with bass or treble active, the indicator light of the respective key blinks.
Product and safety information Battery and charger information This device has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. This device is intended for use when supplied with power from the following chargers: AC-3, AC-4, AC-5, AC-8, AC-15, and DC-4. The exact charger model number may vary depending on the type of plug.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Nokia is under license. The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document.