QUORION CR 1000 User Manual page 43

305 – VERSION PRINT PROCEDURE
1. Turn Lock to P (also X or Z when allowed)
2. Enter 305 on the TYPE key
3. The register will print the version information on the receipt printer.
B: Qboot Rel. 2.00
F: 1-WE
P: T2020711
C: CR 1000
D: 06-LTP2342-WE
RAM: 1536K
306 – RE-INIT PRINTER LOGO'S
1. Turn Lock to P (also X or Z when allowed)
2. Enter 306 on the TYPE key
3. The Printer logo('s) will be sent to the printer controller. all available modes are
displayed.
4. Finished
400 – DIRECT TRANSACTION TEST
1. Turn Lock to P (also X or Z when allowed)
2. Enter the number of transaction on the X key if not entered then 10 transactions is
default
3. Enter 400 on the TYPE key
4. The register will use the REGISTER number as CLERK and SALESPERSON
number when programmed else it will use CLERK 1 and SALESPERSON 1.
5. The register will now make a sale of 10 articles. The articles used depend on the
register number. It will use article 1 to 10 and add the REGISTER x 10. So on
register 1 it will use article 11 to 20.
6. The transaction is closed on TENDER 1.
7. Finished
402 – DIRECT TRANSACTION TEST
1. Turn Lock to P (also X or Z when allowed)
2. Enter the number of transaction on the X key if not entered then 10 transactions is
default
3. Enter 402 on the TYPE key
4. The register will use CLERK 1 and SALESPERSON 1.
5. The register will now make a sale of 10 articles. It will use article 1 to 10.
6. The transaction is closed on TENDER 1.
7. Finished
4444 – RESET REPORTS AND COUNTERS
1. Turn Lock to P
2. Enter 4444 on the TYPE key
3. The register will use now clear all reports, tables and reset the receipt and invoice
counters.
4. It will print on the journal MESSAGE# 68 (SYSTEM CLEAR)
5. Finished
BOOT version
Display Font Table (WE = Western Europe)
Flash ROM version
Standard-Configuration
Printer driver version
Total Memory
1.50.417220 BA-englisch GB CR1000 QUORION CE (Stand 23.01.09)
43