Crestron TPMC-8L Quick Manual page 38

NET
This 4-position mini-terminal block connector provides Cresnet network connection
from the touchpanel as well as power to the touchpanel.
 Pins 24 and G provide 24 VDC and ground.
 Pins Y and Z provide communications (data)
VID IN (unbalanced)
Unbalanced composite video input
Input impedance: 75 Ω nominal
Input level: 1 V
Maximum DC offset: ±2 Volts
Connects to any conventional coax video source (S=shield)
VID IN (balanced)
Balanced composite video input
Input impedance: 100 Ω nominal
Input level: 1 V
Maximum DC offset: ±2 Volts
Connects to any Crestron CH CAT5 Video Out port via CresCAT
cable (S=shield)
LAN (Ethernet)
One 8-wire RJ-45 connector provides an Ethernet 10baseT/100baseTX,
full duplex, IEEE 802.3U compliant network connection.
LAN Connector
PIN
34
Crestron Quick Guide to Touchpanel Connections
nominal, 1.5 V maximum
p-p p-p
nominal, 1.5 V maximum
p-p p-p
SIGNALS
1 TX +
2 TX -
3 RC +
4 N/C
®
PIN SIGNALS
5 N/C
6 RC -
7 N/C
8 N/C
NET
24 Y Z G
Doc. 4903B