Table of Contents
Advertisement
syncing The blueTooTh
1 . Power on your iPad .
2 . Slide the On/Off switch on the Bluetooth
Both the Bluetooth
for a few seconds and then shut off .
3 . Press the Bluetooth
and the Bluetooth
4 . Select the Settings icon on your iPad tablet's screen .
5 . Locate and select "Bluetooth" in your iPad tablet's settings menu .
6 . Under Devices on your iPad, select the Bluetooth
7 . The iPad will now prompt you to enter your computer Bluetooth
and press either the Return or Enter key using the Bluetooth
8 . The iPad screen should now show the Bluetooth
connected successfully .
9 . The Power LED will remain illuminated while the keyboard is powered on .
10 . Slide the On/Off switch to "off" when you are done using the keyboard .
11 . From now on when you use the Bluetooth
it should already be connected . If you use it with a new iPad, or it doesn't
connect properly, follow the steps above to reconnect .
Note: The Bluetooth
mode after 15 minutes of non-use in order to preserve battery life.
Just press any key to reactivate the keyboard.
LED and the power LED illuminators will light up
®
Connect button . The Power LED will illuminate
®
LED will flash .
®
Keyboard Case will automatically go into standby
®
To your ipad
®
Keyboard Case to "on" .
®
Keyboard Case .
®
Keyboard Case has
®
Keyboard Case with your iPad,
®
password
®
Keyboard Case .
®
6
Advertisement
Table of Contents
