Inserting Your Ipad Into The Case; Charging The Keyboard - Brookstone Keyboard Case Manual

inserTing your ipad inTo The case

1 . Open the Bluetooth
2 . Pull the iPad Security Tab out from the frame .
3 . Slide your iPad into the frame so that its screen is facing out of the frame
and its Power Button is accessible .
4 . Tuck the iPad Security Tab back in behind your iPad .

charging The Keyboard

1 . Plug the charging cord (included) into the charging outlet at the control panel
and into a USB outlet . (see the illustration below for part locations) .
Bluetooth
Charge LED
Power LED
2 . The charging LED will illuminate red during charging, and shuts off when
charging is complete .
3 . The keyboard takes approximately 4 . 5 hours to charge for up to 90 hours of use .
Note: The charging LED indicator will blink when your Bluetooth
Case's battery needs recharging.
5
Keyboard Case completely .
®
LED
®
Bluetooth
®
Connect Button
Charging Outlet
On/Off Switch
Keyboard
®