Behringer Virtualizer Pro DSP1024P User Manual page 8

Ultra-high performance digital multi-effects processor
Hide thumbs Also See for Virtualizer Pro DSP1024P:
Table of Contents

Advertisement

1
The two LED CHAINS display the input signal level in dB, referenced to the internal digital maximum.
Please note that the nominal level of the VIRTUALIZER PRO can be selected with the +4 dBu / -10 dBV
switch located on the back panel.
2
The EFFECT TABLE gives you an overview of the 32 different effect algorithms.
3
After power-up, the LED DISPLAY shows the number of the preset last used. This clearly legible, 2½
digit numeric display has plus/minus indicators to show that parameters are being incremented or
decremented in Edit mode.
4
With the JOG WHEEL, a continuous rotary control, you can freely edit the selected parameters. Turn
the wheel clockwise to increase the values, or counterclockwise to reduce them. As long as none of the
edit functions to the right of the JOG WHEEL have been selected, you can use the wheel to select a
program directly, which is shown by a dot lit up in the DISPLAY. While this dot is on, you can select a
program though its settings will not take immediate effect. When the JOG WHEEL has not been touched
for at least one second, the LED in the DISPLAY disappears and the program will be loaded.
5
Use the EFFECT key to directly select one of the 32 basic effect algorithms with the jog wheel.
Whenever a new algorithm is selected, all parameters are reset to default values. See table
6.4 in the appendix.
6
The VARIATION key allows you to select an alternative variation of each effect algorithm activating a
different setup of the numerous internal effect parameters. With this feature you can extensively
manipulate the effect sound within a very wide range.
7
Use the ENGINE L key to select the left audio channel for true-stereo effects. Many effects may have
different ENGINE L and ENGINE R parameters available through EDIT A and EDIT B. Where to find
which parameter can be seen from the parameter list printed on the top of the unit.
8
VIRTUALIZER PRO DSP1024P
Fig. 1.2: Display section of the DSP1024P
Fig. 1.3: Function keys and jog wheel
1. INTRODUCTION

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents