Troubleshooting; Specifications - Harman Kardon Onyx Studio Owner's Manual

Onyx Studio

Troubleshooting

If your harman Kardon Onyx Studio is not performing the way you think it should, check if the problem is covered in this section before calling your dealer or contacting a harman
Kardon representative.
there is no sound coming from the speaker
distortion (static, crackling or hissing sounds)
loud hum or buzzing noise
Battery not charging

Specifications

no of channels
transducers
Bi-amplification
Maximum Spl
power requirement
power adaptor
Built-in battery
power consumption
Speaker impedance
Frequency Response
Frequency range
transmitter power
Modulation
Wireless
dimensions (dia x W x h)
Problems
4
2 X 3" woofers, 2 X ¾" tweeters, 2 x passive radiators
4 X 15W
95dB @ 1m
100 – 240 V ac, 50/60 hz
19V, 2.0a
3.7V, 2600mah, cylindrical lithium Ion Rechargeable Battery
38W Maximum <1W stand by
4 ohm per speaker
60hz – 20khz
2402Mhz ~ 2480Mhz
<4dBm
gFSK/ /4-dQpSK/8-dpSK
Bluetooth 3.0 a2dp v1.3 aVRcp v1.5
280mm X 161mm X 260mm
Solutions
• no power to unit. Make sure that the wall outlet or
power strip has power.
• Make sure that all switches for outlet/power strip are
On and that all switches for the unit are On.
• If you have not plugged it to the ac source, make sure
that the battery is charged.
• audio source or source material may be the problem.
test the hK Onyx Studio with another source.
• It might happen due to ground loop (an unsuitable
connection). turn the hK Onyx Studio OFF and connect
it to another wall outlet.
• no power to unit. Make sure that your wall outlet or
power strip has power.
• Make sure that all switches for outlet/power strip are
On and that all switches for the unit are On.
troubleshooting
5