2.
Tap the right soft key function Menu > My Text.
3.
Tap the Edit My Text Messages entry to display the list of editable Text
Messages.
4.
Tap a pre-existing message entry.
5.
Use either the virtual QWERTY keyboard or virtual keypad to edit the text.
6.
Tap
E-mail Account Setup
E-mail can be sent and received using ActiveSync, or you can also configure your Omnia
to send E-mail using an ISP account.
Note: For more information on how to wirelessly sync e-mail, refer to the Wireless Sync
documentation included within the Companion CD.
Creating an Email Account
1.
From the Today screen, tap the right soft key function Main Menu > Message
> Setup E-mail to launch the E-mail Setup screen and begin the setup
process.
2.
Follow the setup procedure.
Using Outlook for E-mail
Install ActiveSync on your PC and set up a Standard Partnership, so you can send/receive
E-mail. For more information, refer to "Setting Up a Partnership" on page 120. E-mail is
composed off-line and is sent to the intended recipient(s) the next time you perform
ActiveSync.
1.
From the Today screen, tap Main Menu > Message > Outlook E-mail.
2.
Press the right soft key function Menu > New.
3.
Enter the E-mail address in the To field.
4.
Tap the Subject field and enter a subject.
5.
Tap the Message field and enter the content of your E-mail.
6.
When you're finished, press the left soft key function Send.
Using an ISP for E-mail
If you've configured your Omnia to send E-mail using an Internet Service Provider (ISP),
you can send E-mail directly from your Omnia without connecting to your PC through
ActiveSync.
to save your changes and return to the message.
Messaging 64