Connections Settings - Samsung SCH-i910 User Manual

Connections Settings

Beam
A Beam connection can be established by:
1.
From the Today screen, tap the right soft key function Main Menu > Settings
> All Settings > Connections tab > Beam.
2. Tap the box to place a check mark to receive all incoming beams, if desired.
3. Tap
Bluetooth
Bluetooth is a short-range wireless communications technology capable of exchanging
information over a distance of about 30 feet without requiring a physical connection.
Unlike infrared, you don't need to line up the devices to beam information with Bluetooth. If
the devices are within a range of one another, you can exchange information between
them, even if they are located in different rooms.
•
For more information, refer to "Bluetooth and Wi-Fi Services" on page 110.
Connections
Connections allows you to set your network connection settings.
1. From the Today screen, tap the right soft key function Main Menu > Settings
> All Settings > Connections tab > Connections.
2.
Make any changes, if necessary, in the Tasks or Advanced tabs.
3.
Tap
Domain Enroll
You can enroll into a domain to connect your device with company resources. You will
need the enrollment password provided by your system administrator.
1. From the Today screen, tap the right soft key function Main Menu >
Settings > All Settings > Connections tab > Domain Enroll to open the
Domain Enrollment screen.
2. Tap Enroll.
3. Tap Next. Read the on-screen instructions to enroll.
USB Connection Mode
USB Connection Mode allows you to select a function for your device when using a USB
connection.
1. From the Today screen, tap the right soft key function Main Menu > Settings
> All Settings > Connections tab > USB Connection Mode.
2. Tap a USB function: ActiveSync or Mass storage.
to save your changes and return to the previous screen.
to save your changes and return to the previous screen.
Settings 146