Display Symbols - Midland G-11 Owner's Manual

OWNER'S MANUAL FOR THE G-11 (GMRS)
Operating the Radio
CAUTION: DON'T EXPOSE THE DISPLAY TO EXTREME HOT OR COLD TEMPERATURE
1. Channel number: Displays channel number 1-15.
2. RX Symbol Indicates busy channel.
3. TX Symbol Indicates unit transmitting
4. CTCSS Code Symbol: Indicates "CTCSS" tone is active
5. DCS Symbol: Indicates that Digital Coded Squelch mode is on.
6. Musical note indicates ROGER BEEP is on
7. SAVE Symbol: Flashes indicating battery save is active
8. Key Symbol indicates when the keypad has been locked. Only the "PTT" and "CALL"
buttons are active when this indicator is on
9. Shows the "CTCSS" or "DCS" code you have selected. When this is on, other radios you talk
to must be set to the same code
10. DW Symbol: Indicates Dual Watch channel selection is active
11. VOX Symbol: Indicates "VOX" is activated
12. B.SCAN indicates the scan mode B is in use. SCAN indicates the normal scan mode is in
use
13. BEEP indicates the button press tone is active
14. Battery symbol shows the battery condition. Replace or recharge the batteries when this
indicator displays 2 or fewer segments of the battery
15. M Symbol: Indicates a memory channel is active
16. Number indicates memory channel in use.(when programmed)
17. Vibrator Symbol : Indicates call vibrator is on.
http://www.midlandradio.comPage

DISPLAY SYMBOLS

6 of 16