Table of Contents
Advertisement
The rear-panel DIP switch provides the following setup
options. The positions shown in bold type are the factory set-
tings.
Switch
Manual/Auto
Function
Switch Position
1
Number®
Switch Up
Auto
Switch Down
Manual
Manual/Auto: Automatic activation is defeated in the
Manual position. In Manual mode, the AMS8100 functions as a
standard 8x1 mixer.
Last Mic Lock-On: Last Mic Lock-On feature keeps the
most recently activated microphone turned on until a newly ac-
tivated microphone takes its place. When defeated, micro-
phones turn off after their preset hold time.
Hold Time: Adjusts the time an activated microphone
(which is not locked on) remains on after the talker stops talk-
ing. Settings are 0.4 seconds or 1.0 second.
DIP SWITCHES
(MIXER
REAR
PANEL)
1 2 3 4 5 6 7
DIP SWITCH SW902 FUNCTIONS
Last Mic
Hold Time
Lock-On
2
3
On
0.4 second
All mics off after
1.0 second
hold time
English --
NOTE: Switch positions and effects are shown in the il-
lustration below and also on the mixer label.
DIP SWITCH SW902
Off-Attenuation
Level
Threshold
4
5 Up
6 Up
5 Down
6 Up
15 dB
5 Up
6 Down
5 Down
6 Down
¥
(completely
off)
Off-Attenuation: Changes the off-attenuation level from
15 dB to infinity (¥). With the 15 dB setting, an unused micro-
phone is 15 dB lower in level than when it is activated. With the
¥ setting, an unused microphone is completely off.
Limiter Threshold: Changes the output limiter threshold.
Settings are OFF (factory setting), +16 dBu, +8 dBu, or +4 dBu
(see Internal Modifications for other threshold settings).
Link Global/Local: Determines whether each linked
AMS8100 output contains only its own program output, or that
of all linked mixers (see Mixer Linking for more information).
11
Limiter
Link
Local/Global
5,6
7
= Limiter off
= +8 dBu
Global
= +16 dBu
= +4 dBu
Local
Advertisement
Table of Contents
