Component Part Identification And Specifications; Identification Of Component Parts; Important Specifications - Holland FW3110 Operating Manual

1. Component Part Identification and Specifications

1.1 Identification of Component Parts (Standard Greased FW3510 Shown)
Release
Handle
Spring
Yoke

1.2 Important Specifications

"Weightsaver"
Mounting Bracket
"ISO/DIN"
Mounting Bracket
2
Cam Plate
Lock Pin
Grease Fittings
Lock Jaws
12° min.
15° min.
Adjustment
Bolt and Nut
Grease
Grooves
Fifth Wheel Model
No. **
D-Value
FW3510-140 150 kN
FW3510-160 150 kN
FW3510-190 150 kN
FW3510-230 150 kN
* Fifth Wheel Height "H" Does Not Include Mounting Plate Thickness.
** For the low lube version replace the "35" with "34" (i.e. FW3410-150);
for the no lube version replace the "35" with "31" (i.e. FW3110-150).
Fifth Wheel Model
No. ** D-Value
FW3510-150 150 kN
FW3510-180 150 kN
FW3510-200 150 kN
* Fifth Wheel Height "H" Does Not Include Mounting Plate Thickness.
** For the low lube version replace the "35" with "34" (i.e. FW3410-150);
for the no lube version replace the "35" with "31" (i.e. FW3110-150).
Lock Pins
Release
Handle
Lock Jaws
12° min.
Max.
Fifth Wheel
Vertical Load Height* "H"
20 tonne 140 mm
20 tonne 160 mm
20 tonne 190 mm
20 tonne 230 mm
15° min.
Max.
Fifth Wheel
Vertical Load Height* "H"
20 tonne 150 mm
20 tonne 180 mm
20 tonne 200 mm
XL-FW1114-01 Rev. A
Release
Handle
Lock
Bar
"H"
"H"