2-5 Jumpers
For some features needed, users can change the jumper settings on this motherboard to modify them.
This section explains how to use the various functions of this motherboard by changing the jumper
settings. Users should read the following content carefully prior to modifying any jumper setting.
Description of Jumpers
However, in this manual, Pin 1 is simply labeled as "1".
cap on the two pins to temporarily short them. The shorting can also be done by touching two
pins by a screwdriver for a few seconds, but using jumper cap is recommended. It can prevent
hazardous ESD (Electrical Static Discharge) problem.
Jumper
Clear CMOS Jumper: CLR_CMOS
The motherboard uses CMOS RAM to store the basic hardware information (such as BIOS data,
date, time information, hardware password...etc.). Clear CMOS data is the fast way to go back to
The steps to clear CMOS data are :
1. Turn off the computer, unplug the power cord from the power outlet.
data.
Clear
Normal
(Default)
CLR_CMOS
Disconnect the power cable before adjusting the jumper settings.
Do not clear the CMOS while the system is turned on.
Diagram
1
1
1
1
3
1
3
Description
17