Install An Expansion Card - Foxconn H67S Series User Manual

2-3 Install an Expansion Card

!
Make sure the motherboard supports the expansion card. Carefully read the manual that
came with your expansion card.
Always turn off the computer and unplug the power cord from the power outlet before
installing an expansion card to prevent hardware damage.
Follow the steps below to correctly install your expansion card in the expansion slot.
1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis
back panel.
3. Make sure the metal contacts on the card are completely inserted into the slot.
6. Turn on your computer. If necessary, go to BIOS Setup to make any required BIOS changes for
your expansion card(s).
7. Install the driver provided with the expansion card in your operating system.
PCI Express x16
Gently insert the graphics card into the PCI Express x16 slot.
Make sure the graphics card is locked by the latch at the end of
the PCI Express x16 slot.
Push the latch at the end of the PCI Express x16 slot to release
the card and then pull the card straight up from the slot.
13