Preparing For Surround Sound; Speaker Settrngs - Kenwood VR-605 Instruction Manual

Preparing for surround sound
To enable you to obtain optimum enjoyment from the receiver's lrstenrng
modes, make sure to complete the speaker settings (subwoofer. front,
center, and surround speakers) as described &low.
For V&615 (HTB model), do not select "LRG" (large) for front, center,
and surround speakers as this will cause the speakers to malfunction
MULTI CONTROL
POtiER ON/OFF
(KRF-VSOSOD/
SEi UP
a Turn on the power to this receiver by pressing POWER ON/
STANDBY 0 (for VR-605/615) or POWER ON/OFFend ON/
STANDBY 0 (for KRF- V506OD/V406OD/V556OL7) or POWER 0
key.
0 Press the SET UP key to enter the SET UP mode and use the
0 UsetheMULTlCONTROLknoborkeystoselecttheappropriate
MU1 Tl CONTROL knob or keys for the following displays.
center speaker setting.
c
I SPSETUP
:i TESTTONE
S DISTANCE
4
EXIT
The flow of the SET UP IS as follows,
If you selected "LRG" as the front speakers setting,
L
sr CNTR NML (normal) : An average srze center speaker IS
connected to the receiver.
'5' CNTR LRG (large)
: A large center speaker is connected to
the receiver
3' CNTR OFF : Center speaker settrng mode to the
receiver IS OFF.
S"rri""d
R
4
SR
E
Subwoofer
SL
Fie-mrx
9
SW
SR
4
s,L
s'w
B Select a speaker system.
0 Select SP SETUP and press the SET UP key again so that the
subwoofer setting indication "SUBW ON" appears.
e Use the MULTI CONTROL knob or keys to select the
appropriate subwoofer setting.
ii SUBW ON : Subwoofer setting mode to the receiver IS ON.
C? 2 SUBW OFF : Subwoofer setting mode to the recerver is OFF.
l
The rnrtral settrng IS "SUBW ON"
l
When the setting "SUBW OFF" IS selected, the front speakers
are automatrcally set to "FRNT LRG" and the procedure skrps to
step 0.
Before step 0, press the SET UP key to accept the setting.
l
Whensubwooferoutput sound IS requrred, select "FRNTNML".
0 Press the SET UP key to accept the setting.
*The front speakers settrng Indication "FRNT LRG" appears.
0 UsetheMULTlCONTROLknoborkeystoselecttheappropriate
front speakers setting.
[:
f FRNT NML (normal) : Average sze front speakers are
connected to the receiver.
2' FRNT LRG (large) : Large front speakers are connected to
the receiver
l
For VR-615 (HTB model), do not select "LRG" (large) for front
speaker as thus wrll cause the speaker to malfunction.
l
For"FRNTLRG"selectron. nosoundwrll beheardfromsubwoofer
speaker even when It IS set to ON. However, if you select
CINEMA EQ when subwoofer is selected, you wrll be able to
hear sound from the subwoofer.
When in STEREO mode, thesound goesdirectlytofrontspeaker.
0 Press the SET UP key to accept the setting.
*The center speaker setting indrcatron "CNTR" appears.
l
For VR-615 (HTB model), do not select "LRG" (large) for center
speaker as thus wrll cause the speaker to malfunctron.
If you selected "NML" as the front speakers setting,
C
i CNTRON : Center speaker settmg mode to the
receiver IS ON.
.2 CNTR OFF : Center speaker setting mode to the
receiver IS OFF.
@ Press the SET UP key again to accept the setting.
*The surround speaker settrng rndrcation "SURR" appears.
0 Use the MULTI CONTROL knob or keys to select the
appropriate surround speaker setting.
If you selected "LRG" as the center speaker setting,
i SURR NML (normal): Average srze surround speakers are
connected to the receiver
2 SURR LRG (large)
: Largesurroundspeakersareconnected
to the recerver.
3 SURROFF : Surround speaker settrng mode to the
recetver IS OFF.
Continued to next page
17EN