PRIVACY
Default
AREA SEL
1/8
COLOR
1
TRANSP
1.00
MOSAIC
OFF
17 LANGUAGE menu
Seven languages, ENGLISH ,JAPANESE, DEUTCH, FRANCAIS, RUSSIAN, PORTUGUES and
ESPANOL, are available with this camera.
18 CAMERA ID menu
Up to 40 characters can be input for camera ID.
To enter CAMERA ID menu, press
Use
,
,
,
buttons to move a block cursor in character table and press
selected character.
To move the character input position on CAMERA ID input line, move a cursor to ←→ on COMMAND
LINE and press
button on ← or →.
To clear CAMERA ID input line, move a cursor to CLR on COMMAND LINE and press
To set the location of CAM TITLE to be displayed on the monitor, move a cursor to POS and press
button. Then, the menu will disappear and the CAMERA ID will be displayed on the monitor.
Move CAMERA ID by using
Menu will appear again.
To finish CAM TITLE menu, press
OSD Menu Features/Setup
Selects one of AREA1~AREA8 to be adjusted.
TOP(BOTTOM) -
button moves up and
(bottom) border of the selected window at AREA SEL.
LEFT(RIGHT) -
button moves left and
(right) border of the selected window at AREA SEL
Sets one of 8 colors for the selected mask window at AREA SEL.
Transparency rate for the mask can be adjusted.
0.00 - Mask is fully transparent and not visible.
0.50 - Mask is 50% transparent.
0.75 - Mask is 25% transparent.
1.00 - Mask is not transparent.
Enables or disables the mosaic effect for the selected mask window at
AREA SEL
button at MAIN menu-2>CAMERA ID.
,
,
,
buttons and press
button on RET on command line.
20
Descriptions
button moves down the top
button moves right the left
CAMERA ID input line
COMMAND LINE
button to fix.
button to input the
button.