Pict Adjust Menu; White Bal Menu - Vitek Mighty Series Manual

OSD Menu Features/Setup

10 PICT ADJUST menu

To enter PICT ADJUST menu, press
PICT ADJUST Default
MIRROR OFF
BRIGHTNESS 000
CONTRAST 120
SHARPNESS 128
HUE 128
GAIN 128

11 WHITE BAL menu

White balance can be set to ATW, PUSH, USER1, USER2, ANTI CR, MANUAL or PUSH LOCK.
ATW (Auto Tracking White balance) and PUSH (Full pull-in) are continuously monitoring/analyzing the
color temperature of the incoming light and correcting the white balance.
ATW limits the color temperature range at about 2,500˚K~8,500˚K to reduce the excessive
compensation for the big object which has a single color.
PUSH has no limits between about 1,800˚K~10,500˚K but it may over-compensate the white balance for
the big object which has a single color.
In cases where it goes under 2,500˚K such as halogen light, ATW may stop. If so, PUSH mode is
recommended.
USER1 and USER2 are a fixed white balance which is user-programmable by R-GAIN and B-GAIN and
useful only for the steady light.
ANTI CR (Anti Color Rolling) can reduce color rolling under the fluorescent light when the camera
operates in shutter control without an auto iris lens. (NTSC version only)
button at MAIN menu-1>PICT ADJUST.
Picture will be flipped horizontally if it turns ON.
Increases or decreases the brightness of the picture.
This is different from that of DC iris lens because it simply increases or
decreases the digital gain of the video.
Do not increase this too much or the dynamic range for the highlight area
will decrease.
Increases or decreases the contrast of the picture.
Increases or decreases the sharpness of the picture.
Too much sharpness can make the image too harsh and show more noise
as well as line flicker at the edge of object in the picture.
Adjusts hue for NTSC version only.
Increases or decreases the color gain of the picture.
15
Descriptions