Confi Guring Home City Settings; Confi Guring Current Time And Date Settings Manually - Casio 5262 Operation Manual

Operation Guide 5262
Selecting a Mode
With this watch, everything starts from the Timekeeping Mode.
To determine the watch's current mode
Check the position of the v Left Dial Hand as shown
under "To select a mode" (page E-31).
To return to the Timekeeping Mode from any other
mode
Hold down C for about two seconds until the x Second
Hand returns to 12 o'clock.
E-30
Timekeeping
Use the Timekeeping Mode to view the current time and date. To enter the
Timekeeping Mode from any other mode, hold down C at least two seconds.
Hand Functions
z Hour Hand
x Second Hand
c Minute Hand
v Left Dial Hand: Indicates the day of the week.
b 24-hour Hand:
Indicates the current 24-hour timekeeping hour. The long
end indicates the current hour between 18:00 and 6:00.
The short end indicates the current hour between 6:00
and 18:00.
n Right Dial Hands:
Indicate the current time in the World Time City (page
E-51) in 24-hour format.
m Day Indicator
E-32
The watch will exit the setting mode automatically if you do not perform any
operation for about two or three minutes.
For details about city codes, see the "City Code Table" at the back of this
manual.
2. To change the Home City setting, press
x Second Hand clockwise.
Keep pressing D until the x Second Hand is pointing
at the city code you want to select as your Home City.
Each time you select a city code, the z Hour Hand,
c Minute Hand, b 24-hour Hand and m Day
Indicator move to the current time and date for that
city code. Do not perform the next operation until
these hands stop moving.
E-34
To toggle the Home City time between standard time and daylight saving time
1. Perform the step 1 under "To confi gure Home City settings" on page E-33.
Each time you select a city code, the z Hour Hand, c Minute Hand, and
b 24-hour Hand move to the current time for that city code. Do not perform the
next operation until these hands stop moving.
B to toggle the time for the city code of the currently selected Home City
2. Press
between STD (standard time)/DST (daylight saving time).
In the city code setting mode, the v Left Dial Hand indicates the current daylight
saving time setting as STD (standard time) or DST (daylight saving time).
Note that you cannot switch between STD (standard time)/DST (daylight saving
time) while UTC is selected as your Home City.
3. After the setting is the way you want, press
E-36
Confi guring Current Time and Date Settings Manually
You can confi gure current time and date settings manually when the watch is unable
to receive a time calibration signal.
To change the current time setting manually
1. In the Timekeeping Mode, keep
fi ve seconds) as the x Second Hand goes through the
following sequence.
Moves to YES (or Y for some models) or NO (N)
to indicate the last signal reception result, then to
READY (R), and then to the city code of the currently
selected Home City.
At this time, the v Left Dial Hand will indicate the
Home City's current daylight saving time setting (STD
or DST).
E-38
D to move the
A to return to the Timekeeping Mode.
A depressed (for about
To select a mode
Press C to cycle between the modes as shown below. The v Left Dial Hand
indicates the currently selected mode.
C
Timekeeping Mode
The hand indicates the day
of the week (SU, MO, TU,
WE, TH, FR, SA).
C
Alarm Mode
The hand points to ALM.
C
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting
either standard time or daylight saving time (DST).
To confi gure Home City settings
Note
This watch does not have a city code that
corresponds to Newfoundland.
1. In the Timekeeping Mode, keep
fi ve seconds) as the x Second Hand goes through the
following sequence.
Moves to YES (or Y for some models) or NO (N)
to indicate the last signal reception result, then to
READY (R), and then to the city code of the currently
selected Home City.
This indicates the city code setting mode.
B to toggle the time for the currently selected city code between STD
3. Press
(standard time)/DST (daylight saving time).
In the city code setting mode, the v Left Dial Hand indicates the current daylight
saving time setting as STD (standard time) or DST (daylight saving time).
Note that you cannot switch between STD (standard time)/DST (daylight saving
time) while UTC is selected as your Home City.
4. After all the settings are the way you want, press
Mode.
Note
After you specify a city code, the watch will use UTC* offsets in the World Time
Mode to calculate the current time for other time zones based on the current time
in your Home City.
Selecting some city codes makes it possible for the watch to receive the time
calibration signal for the corresponding area automatically. See page E-17 for
details.
* Coordinated Universal Time, the world-wide scientifi c standard of timekeeping.
The reference point for UTC is Greenwich, England.
2. Change the Home City and daylight saving time (DST) settings, if you want.
For details about these settings, see steps 2 and 3 under "To confi gure Home
City settings" (page E-33).
In the following steps, each press of C cycles between settings as shown
below.
C
Home city/DST
Stopwatch Mode
The hand points to 0.
C
World Time Mode
The hand points to STD
or DST.
E-31
A depressed (for about
E-33
A to return to the Timekeeping
E-35
E-37
C
Year
Hour/Minute
(tens digit)
C
C
Year
(ones digit)
C
Day Month
C
E-39