Cleaning And Care; Cleaning The Exhaust Filters; Surface Light Replacement - Electrolux Over the Range Microwave Oven Use & Care Manual

Disconnect the power cord before cleaning or leave the door open to deactivate

Cleaning the exhaust filters

The oven ventilation exhaust filters should be removed and
cleaned often; generally at least once every month.
CAUTION
To avoid risk of personal injury or property damage,
do no t operate oven hood without f ilters properly in
place.
Surface lights
Ventilation
filters
1. To remove the exhaust ventilation filters, pull the
lever, t hen pull filter downward .The filter will drop out .
Repeat for the 2nd filter.
2. Soak the ventilation filters in hot water using a mild
detergent. Rinse well and shake to dry. or wash
ventilation filters in dishwasher. It is best to place
in upper rack of dishwasher for cleaning.
NOTES
Do not use ammonia cleaner. The ammonia
cleaner may corrode and darken the
aluminum on the filter.

CLEANING AND CARE

the oven during cleaning.
Front
3. To reinstall the exhaust ventilation filter, infix the
hooks into the holes of base plate, then pull the
lever and toward oven to lock
filter using the same procedure

Surface light replacement

Rear
To avoid risk of personal injury or property damage,
wear glo
1. Unplug the microwave oven or turn off power at the
main circui
2. Remove the bulb cover mounting screws at light
positions under the microwave.
3. Replace bulb with 40 watt appliance bulb.
4. Re-install bulb cover and mounting screw.
5. Plug the microwave back into the power supply or
turn the
.
CAUTION
ves when replacing the light bulbs.
t breaker.
power back on at the main circuit breaker.
23
Reinstall the 2nd
.
E