Appendix Ctcp/Ip Settings In Windows - Buffalo WCR-GN User Manual

Appendix C
TCP/IP Settings in Windows
Windows 7
To perform the settings for Windows 7, follow the procedure below.
1
Click Start > Control Panel > Network and Internet.
2
Double click "Network and Sharing Center".
3
Click "Change Adapter Settings" on the left side menu.
4
Right click on "Local Area Connection", then click "Properties".
5
If the message "Windows needs your permission to continue" appears, click "Continue".
6
Select "Internet Protocol Version 4 (TCP/IPv4)" then click "Properties".
7
Select "Obtain an IP address automatically" and "Obtain DNS server address automatically", then
click "OK" in normal situations.
If you fix the IP address, enter the value as necessary.
ex) If the router's IP address is 192.168.11.1,
IP address
Subnet mask
Default gateway
Preferred DNS server
Alternate DNS server
8
Click "OK".
WCR-GN User Manual
192.168.11.80
255.255.255.0
blank
blank
blank
96