Basic Control Operations
Turning the Solo On or Off
Press the
control on the center of the front panel.
pOwer/VOluMe
Adjusting the Volume
Turn the front panel
pOwer/VOluMe
Note: On the control illustrations –
Regular arrows indicate to press and release the
button or control.
Double headed arrows indicate to press and hold the
button or control.
This symbol indicates the control is turned then pressed.
Setting the Clock
Turn the
control until the clock icon
1
MOde
Press the
control. The clock icon and time display will flash.
2
MOde
Turn the
control to adjust the time.
3
MOde
Press the
control again to set the time. The display reverts to its previous
4
MOde
mode and the new time is set.
Radio Operation
Selecting a Source
Turn the
control until the source you want is highlighted with brackets.
1
MOde
Note that other function and alarm setting control icons also may be selected.
Press the
control to select the highlighted item. Or just wait a few
2
MOde
seconds and the source is automatically selected. The Solo begins playing the
source selected.
Note: You can also select sources by simply pressing the
will select the next source in this sequence: AM > FM > AUX > Presets > AM, etc.
Tuning In a Radio Station
Use the
control to select the AM or FM radio source.
1
MOde
Turn the
control until the station frequency you want shows in the display.
2
tune
• If the radio source you want it already selected you can skip step
control to tune in a new station.
tune
• If the station you select has been assigned to a station preset the number is
displayed.
knob.
is highlighted with brackets
control. Each press
MOde
.
This illustration shows the FM
source highlighted for selection.
and use the
1
5