Pnp/ Pci Configurations - Acer Aspire SA85 Service Manual

PnP/ PCI Configurations

Reset Configuration Data
Resources Controlled By
IRQ Resources
PCI / VGA Palette Snoop
: Move Enter: Select
F5: Previous Values
The following table describes the parameters found in this menu. Settings in boldface are the default and
suggested settings.
Parameter
Reset Configuration Data
Resources Controlled By
IRQ Resources
PCI/VGA Palette Snoop
Chapter 2
Phoenix - AwardBIOS CMOS Setup Utilitye
PnP/PCI Configurations
[Disabled]
[Auto (ESCD)]
[Press Enter]
[Disabled]
+/-/PU/PD: Value F10:Save
F7: Optimized Defaults
Description
Selecting "Enabled" to reset Extended System
Configuration Data (ESCD) only if you installed
a new add-on and the system reconfiguration
has caused such a serious conflict that the
operating system can not boot. Otherwise, you
should leave it unchanged.
This BIOS can automatically configure all of the
boot and Plug and Play compatible devices. You
can also set it as Manual and go into each of the
sub menu to choose specific resources.
The items are adjustable only when "Resources
Controlled By" is set to Manual. By pressing
"Enter" to access the sub menu.
Disabled - Data read or written by the CPU is
only directed to the PCI VGA device's palette
registers.
Enabled - Data read or written by the CPU is
directed to both the PCI VGA device's palette
registers and the ISA VGA device's palette
registers, permitting the palette registers of both
VGA devices to be identical.
Item Help
Menu Level
ESC: Exit F1: General Help
Options
Disabled
Enabled
Auto (ESCD)
Manual
Press Enter
Disabled
Enabled
*If any ISA bus adapter in the
system requires VGA Palette
snooping, the setting must be set
to "Enabled".
45