Toshiba BDX2000KE Owner's Manual page 29

E5RJ2ED_EN.book Page 29 Thursday, October 29, 2009 3:30 PM
Category
Audio BD Audio Mode
HDMI Audio Out*
• This feature is
available only
when the display
device is
connected by an
HDMI cable.
• Refer to page 33
for more
information.
EN
FUNCTION SETUP
Menus / Options
Mix Audio Output
HD Audio Output
HDMI Multi
(Normal)
HDMI Multi Speaker Front Large
(LPCM) Size
Center Small
Subwoofer On
Surround Large
Surround Small
Back
Default
Channel Test Tone Off
Level
Manual
Auto
Front Lch -12 to
0dB
Center
(Default
Subwoofer
0dB)
Front Rch
Surround
Rch
Surround
Back Rch
Surround
Back Lch
Surround
Lch
Default
Delay Distance Feet
Time
Meters
Front 0 to 18m
(Default
Center
3.6m)
Surround 0 to 18m
(Default
Surround
3.0m)
Back
Default
Description
For BD, selects whether to output the secondary and
interactive audio with primary audio if it is available or
only the primary audio. Refer to "Setting the BD Audio
Mode" on page 26.
"Mix Audio Output":
The audio for the secondary video and the interactive
application will be output together with the audio for
the primary video.
"HD Audio Output":
Outputs only the primary audio. Set this mode in order
to output Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS or DTS-HD audio of BD through HDMI
connection.
Outputs the multi-channel Sets the audio format for
audio signals from HDMI the sound output from the
OUT jack with bitstream or HDMI OUT jack.
LPCM. • For "Speaker Size" and
"Delay Time", if you
Sets the speaker
change the setting of
configuration to suite the
one speaker, the rest of
size/number of your
the speakers will be set
speakers.
automatically.
Press [ENTER] to change
For "Delay Time",
the setting.
difference of the values
among "Front",
"Surround" and
Outputs the test tone from
"Surround Back" cannot
each speaker.
exceed 4.5m (15 ft), and
Use [s / B] to switch
between "Front" and
options, then press "Center" it cannot exceed
1.5m (5 ft).
[ENTER] to confirm.
• For "Delay Time", the
• Test tone will be output
value of "Center",
automatically.
"Surround" and
• To stop the test tone,
"Surround Back" cannot
press [RETURN].
exceed the value of
"Manual":
"Front".
Allows you to manually
select the speaker to test.
Use [K / L] to select the
speaker.
Use [s / B] to adjust the
volume.
"Auto":
Automatically tests all
speakers.
Use [s / B] to adjust the
volume.
Sets the volume level for
each speaker to get the
ideal audio balance.
Use [s / B] to change the
setting.
Sets the desired measure
system. This measure
system will be used for
"Delay Time" setting.
Use [s / B] to change the
setting.
Sets the distance from the
listening point to the
speaker to get the ideal
delay time.
Use [s / B] to change the
setting.
29