Table of Contents
Advertisement
E5RJ2ED_EN.book Page 16 Thursday, October 29, 2009 3:30 PM
Preparing to Play Back
How to Insert a Disc
1
Press [OPEN/CLOSE A] to open the disc
tray.
2
Place the disc on the disc tray with its
label side facing up.
• Make sure the disc is compatible with this unit.
(Refer to page 13 for the list of compatible discs.)
3
Press [OPEN/CLOSE A] to close the disc
tray.
Please allow time for the disc to load.
To eject the disc:
Press [OPEN/CLOSE A].
How to Insert an SD Card
1
Gently push in the SD card, with its label
side facing up, into the SD card slot until it
clicks.
ON/STANDBY
PAUSE
STOP
PLAY
OPEN/CLOSE
To remove the SD card:
In stop mode, gently push in the SD card, then pull it
out slowly.
M
Selecting the Media
edi
When an SD card is inserted, the correct media should be
selected in advance. You can switch the media by
following the steps below. "Media Select" is available
only when an SD card is inserted.
1
In stop mode, press [SETUP].
2
Use [K / L] to select
[ENTER] .
3
Use [K / L] to select "Media Select".
4
Press [ENTER] repeatedly to select the
desired media.
5
Press [SETUP] to exit.
Even if you turn the unit to the standby mode in "SD Card"
mode, it will be in "Disc" mode the next time you turn it on.
16
PLAYBACK
Align the disc to the
disc tray guide.
SD card
, then press
Basic playback
Playing Back
(BD, DVD or a Disc with AVCHD files)
1
Insert a disc.
2
Playback may start automatically.
If not, press [PLAY B].
• Some discs may show a title or a disc menu.
In such case, refer to "Using the Title / Disc / Pop-up
Menu" on page 17.
To pause playback:
Press [PAUSE F].
To return to the normal playback:
Press [PLAY B].
To stop playback:
Press [STOP C].
Playback will be in Resume-On-Stop mode.
Resume-On-Stop mode
If a playback is in Resume-On-Stop mode, when you press
[PLAY B] next time, the playback will start from the point
where it has been stopped.
Note
• Resume playback may not be available for the BD that
supports Java applications (BD-Java).
• In "Disc" mode, the resume information will be cleared
when;
- [STOP C] is pressed while in the Resume-On-Stop
mode.
- the parental level is changed.
- the disc tray is opened.
• In "SD Card" mode, the resume information will be
cleared when;
- [STOP C] is pressed while in the Resume-On-Stop
mode.
- the SD card is removed.
- the unit is turned into the standby mode.
Note
•
may appear at the top-right on the TV screen
when the operation is prohibited by the disc or this
unit.
• During the playback of 2-layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.
• The operation may vary when you play back BD-
video and DVD-video with disc menu. Refer to the
manual accompanying the disc for details.
• Set "Still Mode" setting to "Field" in "Video" menu if
pictures in the pause mode are blurred. Refer to "Still
Mode" on page 28.
EN
Advertisement
Table of Contents
