Char-Broil 463722413 Product Manual page 20

Control Panel and Firebox Supports
7
Stand cart upright.
In front, slide control panel between left and right legs, attach control panel with #10-24x2'' machine screws. Place firebox
supports onto screws and tighten with #10-24 flange nuts. Tighten all screws.
In back, attach upper firebox support with #10-24x2'' machine screws and #10-24 flange nuts.
#10-24
Flange Nut
Qty.8
#10-24x2"
Machine Screw
Qty.8
Valve / Hose / Regulator and Ignitor
8
Insert main burner valve and hose between left firebox support and side brace, attach valve/hose/regulator assembly to
control panel with #10-24x1/2'' machine screws.
Attach ignitor to control panel using the stamped nut that's provided. NOTE: if your grill comes with Snap-in ignitor, please see
Option.
10
Snap-in ignitor
Option: Snap the
ignitor into the
#10-24x1/2"
Machine Screw
Qty.2
20
Control Panel
control panel.
Chamfer edge
Ignitor
Main burner valve
Firebox
Support
Valve/Hose/Regulator
Left firebox support
Stamped nut
Side brace
Hose