Speed Dial Pause And Flash Storage; Speed Dial Number Linking - Toshiba Strata DK System Administration Manual

Setting System Parameters
Speed Dial—Advanced Features

Speed Dial Pause and Flash Storage

Some Speed Dial numbers may require a pause (long or regular) or hookflash be
included (e.g., tone delay requires a pause at the beginning of a Speed Dial number).
Hookflash
The button stores a flash
signal only if
is programmed as a flexible
button on the telephone. The
flash signal is 0.5 or 2 seconds
long (set in system
programming) and is displayed
on the LCD as " ".
Press
...or enter the hookflash dial
code ( +

Speed Dial Number Linking

You can link any of the Station Speed Dial numbers to System Speed Dial codes or to
any of the optional buttons associated with these codes. The Administrator station can
be used to link System Speed Dial Codes. This enables lengthy digit strings to be
stored under one Station Speed Dial button or code.
The number directly stored in the System Speed Dial number dials out first, then the
number linked to it. Typically, a company's special carrier access telephone numbers
are stored as part of the digit string.
To link system/system speed dial numbers
1. Press
2. Press
...or
System Speed Dial
Access Code.
3. Press
28
Regular Pause
The pause is either 1.5 or 3
seconds (set in system
programming). The LCD
displays "
Press
...or if
on the telephone, press
to store a pause.
).
.
See
Codes.
+ a
.
".
is not
Table 8 on Page 42 for Station Speed Dial Access
Strata DK System Administrator Guide 5/00
Long Pause
Ten-second pause, which can
be entered anywhere in the
Speed Dial number. The LCD
displays " ".
Press .