Setting System Parameters
System Messages, Names and Memos
System Messages, Names and Memos
You can write or edit station LCD messages, names or numbers.
To write LCD messages, names, or numbers
1. Access message/
memo/name displays.
2. Enter up to 32
alphanumeric
characters, (see
3
and the figure at the
right) using the
station keypad.
3. Blank out any portion
of a message by
pressing
moving the cursor to
the right, when in the
alpha character mode.
18
When you select a message number, a cursor
(–) appears at the first character in the message.
Move Right
(Alpha mode only)
Table
Move Left
Each character the cursor transverses is deleted.
and
Scrolls alpha/
special characters
Strata DK System Administrator Guide 5/00
2358
Toggles between
alphanumeric
characters