Rotation Adjustment - Mitsubishi WD-52527 Service Manual

Trapezoid Distortion Adjustment
1) Loosen [A-1] and [A-2] so they clear
[A-3].
2) For Distortion at the top of the picture,
rotate [A-3] counter clockwise (the
picture will move upward).
3) For distortion at the bottom of the
picture, rotate [A-3] clockwise (the
picture will move upward).

Rotation Adjustment

Clockwise Rotation Needed
1) Loosen [A-2]
2) Use [A-1] to adjust rotation.
Counter Clockwise Rotation Needed.
1) Loosen [A-1]
4) Use [A-2] to adjust rotation
After Adjustment (refer to previous page)
1) Tighten Nuts (1) and (2).
2) Tighten Slide-Lock-Mate fixing screws (1) and (2).
3) Insure [A-1] and [A-2] are flush against [A-3].
MODEL: WD-52527 / WD-52528 / WD-62527 / WD-62528
Page 31