Speed Control Latch Removal - MTD LT-5 Service Manual

For Discount White Outdoor Parts Call 606-678-9623 or 606-561-4983
16.7. Inspect the bracket for wear or damage. Pay
close attention to the notched teeth on the
bracket. See Figure 64.
Figure 64
16.8. Assemble in reverse order of disassembly
17.

SPEED CONTROL LATCH REMOVAL

17.1. Remove the cutting deck.
17.2. Remove the cotter pin securing the speed con-
trol selector rod to the speed control latch. Slide
the ferrule from the latch. See Figure 65.
Speed Control Selector Rod
Cotter Pin
Figure 65
NOTE: Mark the position of the ferrule on the rod
with some whiteout. This will aid assembly and
allow you to maintain the proper position of the
ferrule.
White Out
19
www.mymowerparts.com
17.3. Using a 9/16" socket and an open-end wrench,
remove the nut securing the speed control latch
assembly to the frame. See Figure 66.
Locking Hex Flange Nut
Figure 66
View of latch assembly from under the unit.
Figure 67
17.4. Inspect the latch for any wear or damage. Pay
close attention to the flange that mates with the