How To Vacuum Package Using Foodsaver; Canisters, Bottle Stoppers & Deli Containers - Sunbeam FoodSaver VAC430 Instruction Booklet

How to Vacuum Package using FoodSaver

Canisters, Bottle Stoppers and Deli Containers
How to Vacuum Package using FoodSaver
Canisters, Bottle Stoppers and Deli Containers
1. Place the appliance on a flat, dry surface
and plug the supply cord into a standard
electrical outlet.
2. Canisters:
Place the item(s) to be vacuum packaged
inside the canister*. Place the lid on
top of the canister. Insert one end of the
Accessory Hose into the Accessory Port
on your FoodSaver
other end of the Accessory Hose into the
hole on the top of the canister.
See figure 1.
Figure 1
Bottle Stoppers:
Insert the Bottle Stopper into the neck of
the bottle. Leave at least 2.5 cm between
the contents and the rim. Insert one end
of the Accessory Hose into the Accessory
Port on your FoodSaver
®
appliance. Insert the
®
appliance.
®
Insert the other end of the Accessory
Hose into the hole on top of the bottle
stopper. See figure 2.
Figure 2
Deli Containers:
Place the item(s) to be vacuum packaged
inside the deli container*. Place the lid
firmly on top of the container. Insert
one end of the Accessory Hose into
the Accessory Port on your FoodSaver
appliance. Insert the other end of the
Accessory Hose into the hole on the
top of the container adaptor. Place the
container adaptor over the grey vacuum
valve on the container lid. Twist the grey
tip of hose while inserting to ensure a
tight fit. See figure 3.
Figure 3
®
®
9