TP-Link TL-ER6120 User Manual page 99

Client IP:
IP Address Pool:
Remote Subnet:
Status
 List of Configurations
In this table, you can view your configurations of the tunnels and edit them by the action buttons.
The No.1 entry in Figure 3-63 indicates: this tunnel is encapsulated by using L2TP. Its user name
is test, the password can be configured, and the router is configured in Client mode. The remote
server is 116.10.10.10 and the remote subnet is 192.168.2.0/24. This entry is enabled.
3.5.3.2 IP Address Poo
On this page, you can configure the IP Address Pool.
Choose the menu VPN→L2TP/PPTP→IP Address Pool to load the following page.
The following items are displayed on t
Enter the IP address of the client which is allowed to connect to this
L2TP/PPTP server. The default IP "0.0.0.0" means any IP address is
acceptable.
Select the IP Pool Name to specify the address range for the server's
IP assignment. This item is available for Server mode.
Enter the IP address range of your remote network. (It's always the IP
address range of LAN on the remote peer of VPN tunnel.) It's the
combination of IP address and subnet mask.
Activate or in activate the entry.
l
Figure 3-64 IP Address Pool
his screen:
-93-