Maintenance; Admin Setup - TP-Link TL-ER6120 User Manual

 General
UPnP Function:
 List of UPnP M apping
After UPnP is enabled, all UPnP connection rules will be displayed in the list of UPnP Mapping.
The NO.1 entry in Figure 3-76 indicates: TCP data received on port 12856 of the WAN port in the
router will be forwarded to port 12856 in 192.168.0.101 server in
Note:
● When using UPnP function, make sure the UPnP is enabled for the router, and the operating
system and applications in the host support UPnP service.
● As some Trojan and viruses can open the specific port using UPnP service resulting in hacker
attack on the host, be careful of using UPnP service.

3.7 Maintenance

3.7.1 Admin Setup

3.7.1.1 Administrator
On this page, you can modify the factory default user name and password of the router.
Choose the menu Maintenance→Admin Setup→Administrator to load the following page.
The fo llowing items are dis
 Administrator
Current User Name:
Current Password:
New User Name:
Enable or disable the UPnP function globally.
Figure 3-77 Administrator
played on this screen:
Enter the current user name of the router.
Enter the current password of the router.
Enter a new user name for the router.
LAN.
-109-