Sanyo PLV-Z1 Service Manual page 17

■ Optical Parts Disassemblies
5.
POLARIZED GLASS-OUT REMOVAL
A
1. Remove four screw
Ass'y upward from the Optical Unit.
2. Remove each screw B and take the glass off upward.
Note:
1.
Do not replace the LCD panel separately otherwise
it can not obtain proper picture
2.
Should be replaced the glass as the film attached
side comes to the LCD panel side.
6.
OPTICAL UNIT TOP REMOVAL
1. Remove eight screws to take the Optical Unit Top off
upward.
and take the LCD Panel/Prism
LCD Panel/Prism Ass'y
A
A
A
A
-17-
B
Note 2
Polarized
Grass-Out
LCD Panel
Fig. 5
Fig. 6