Note: Follow the disassembly procedure in the numerical order given.
3-1. CASE AND FRONT PANEL
2 Two screws (Case)
7 Front panel assembly
3-2. SLIDER (CAM)
2 Bracket (Guide L)
1 Two screws (BTP2.6x6)
3 Leaf spring
SECTION 3
DISASSEMBLY
6 Six screws (BVTP3x8)
6 Slider (Cam)
3 Case
4 Flat type wire (CN421)
5 Connector (CN391)
• Note for Installation of Slider (Cam)
Set the shaft of Cam gear to
be at the position in the figure.
5 Bracket (Guide R)
– 28 –
1 Two screws (Case)
Set the shaft of Lever (O/C) to
be at the position in the figure.
4 Two screws (BTP2.6x6)