Section 3 Disassembly Instructions - Icom IC-R3 Service Manual

SECTION 3
•
REMOVING THE REAR PANEL
1 Unscrew 3 screws, A .
2 Unscrew 1 screw, B .
3 Remove the rear panel in the direction of the arrow.
4 Unplug speaker connector to separate front panel and
rear panel.
Rear Panel
B
•
REMOVING THE LOGIC UNIT
1 Unscrew 1 screw, D .
2 Remove the LOGIC unit in the direction of the arrow.
DISASSEMBLY INSTRUCTIONS
A
Speaker
connector
D
LOGIC unit
•
REMOVING THE RF UNIT
1 Remove the 1 knob and unscrew 2 nuts .
2 Unscrew 3 screws, E, and unsolder 8 points, F.
Unsolder 1 points, H ([OTH-2] only).
3 Remove the shield plate.
4 Unsolder 3 points, G, and remove the RF unit.
F
Knob
Nuts
RF unit
G
3 - 1
H
E E
F
F
Shield plate