Rear Panel Connections - Peavey AAM 2443 User Manual

Reference quality recording and sound reinforcement console

Hide thumbs

Table Of Contents

Table of Contents

(46)

MONO MASTER FADER

This control determines the level of the output signal sent to the MONO output. An adjacent

switch allows a post-fader signal to be sent to the HEADPHONE OUTPUT (42) and the

AFL/PFL LEVEL DISPLAY (45). A yellow LED above the switch indicates AFL (post-fader)

engagement.

(47)

L & R MASTER FADERS

These controls determine the level of the signal sent to the LEFT and RIGHT outputs

respectively. As with all faders, the optimum setting is at unity gain (0).

(48)

POWER LED

This green LED will illuminate when power is applied to the console, indicating the unit is on.

MONO

RIGHT

INSERT

(TRS)

(UNBAL)

MONO

RIGHT

OUT

(BAL)

POWER

(49)

L, R, MONO INSERT

These 1/4" stereo (TRS) jacks, provided on the LEFT, RIGHT and MONO channels, allow an

external device to be inserted into the signal path, pre-MASTER FADER. The tip carries the

signal being sent and the ring is the signal return. A switch in the jack connects the send to

the return if no plug is inserted. The signal must be returned to this jack when this feature is

used. Failure to return the signal will result in no output.

(50)

L, R, MONO UNBAL (UNBALANCED OUTPUT)

These 1/4" jacks allow output of an unbalanced signal and are provided for the LEFT, RIGHT

and MONO channels.

(51)

L, R, MONO BAL (BALANCED OUTPUT)

These XLR connectors allow output of a balanced signal and are also provided for the LEFT,

RIGHT and MONO channels. The unbalanced and balanced outputs can be used

simultaneously, but both output levels are controlled by the corresponding MASTER FADER.