Installation; Installation Of The Projector And Screen; Angle Adjustment; Table 1. Installation Reference - Hitachi CPX275W User Manual

Liquid crystal projector
Hide thumbs Also See for CPX275W:
Table of Contents

Advertisement

INSTALLATION

INSTALLATION

Installation of the Projector and Screen

a
b

Table 1. Installation Reference

a [inches (m)]
Screen size
[inches (m)]
Min.
40 (1.0)
37 (0.9)
60 (1.5)
57 (1.5)
80 (2.0)
77 (1.9)
100 (2.5)
96 (2.4)
120 (3.0)
116 (2.9)
150 (3.8)
145 (3.7)
200 (5.0)
194 (4.9)
CAUTION • Install the projector in a suitable environment according to
instructions of the accompanying manual "SAFETY INSTRUCTIONS" and this
manual.
• Please basically use liquid crystal projector at the horizontal position. If you use
liquid crystal projector by the lens up position, the lens down position and the side up
position, this may cause the heat inside to build up and cause damage. Be especially
careful not to install it with ventilation holes blocked.
• Do not install LCD projector in smoke effected environment. Smoke residue may
buildup on critical parts (i.e.LCD panel, Lens Assy etc.).

Angle Adjustment

CAUTION • Do not release the foot adjuster button unless the projector is
being held; otherwise, the projector could overturn or fingers could get
caught and cause personal injury.
b
[inches (cm)]
Max.
46 (1.2)
3
(8.7)
69 (1.8)
5 (13.1)
93 (2.4)
7 (17.4)
116 (2.9)
9 (21.8)
139 (3.5)
10 (26.1)
174 (4.4)
13 (32.7)
233 (5.9)
17 (43.5)
Press the foot adjuster button
Screen
TOP VIEW
Lens
center
b
a
SIDE VIEW
Foot Adjuster
Foot Adjuster
Rear
ENGLISH-5

Advertisement

Table of Contents
loading

Table of Contents