Removing The Front Cover; Specifications - Yamaha NS-7390 Owner's Manual

REMOVING THE FRONT COVER

The front cover is fastened to the enclosure at six points,
and can be removed if desired. To remove the cover, hold
on to both sides and slowly pull straight away from the
speaker. To reattach, line up the six pegs on the inside
surface of the cover with the six corresponding holes on the
speaker and push gently.
Note
When the cover is removed, take care not to touch the
speaker units with your hands or to exert excessive
force with tools.
4
E-

SPECIFICATIONS

Type ............ 3-way 3-speaker bass-reflex speaker system
Driver ...................................... 16 cm (6-1/2") cone woofer
2.2 cm (7/8") balanced dome tweeter
Impedance ................................................................... 8 Ω
Frequency Response ................................ 38 Hz to 27 kHz
Nominal Input Power .................................................. 60 W
Maximum Input Power .............................................. 220 W
Sensitivity ................................................... 86 dB/2.83 V/m
Crossover Frequency ..................................... 4 kHz, 6 kHz
Dimensions (W x H x D) ..................... 210 x 870 x 265 mm
Weight ......................................................... 10 kg (22 lbs.)
Accessories ......................................................... Stand x 4
G Specifications subject to change without notice due to
product improvements.
G Care should be taken not to exceed the input power
values noted above.
Magnetic shielding type
10 cm (4") cone mid-range
(8-5/16" x 34-5/16" x 10-3/8")
Screw x 8
Pad x 4
Speaker cable (2.5 m) x 1