Configuring A/V And Closed Caption Settings - Motorola DCX700 User Manual

Configuring A/V and Closed Caption Settings

Configuring A/V and Closed Caption
6
The following describes how to configure the audio (for HDMI connections), SD and HD
video settings, and closed caption settings for the DCX700.
Before you adjust the output settings:
•
Connect the DCX700 to the TV and other home entertainment devices
•
Plug the DCX700 into an AC power outlet
•
Initialize the DCX700 and authorize it for services
•
Turn the TV on
When using an HDMI connection between the DCX700 and the television, be sure to
have the cable connected and the TV powered on before adjusting the video settings.
To configure the DCX700 settings on the main User Settings menu screen:
1. Ensure the DCX700 is installed properly and turned on.
2. Press POWER to put the set-top in stand-by mode. Within two (2) seconds press the
MENU key on the remote control.
3. If the TV is on, the on-screen User Settings menu lists the DCX700 settings that can
be adjusted:
Note: Depending on the Electronic Programming guide installed on the DCX700 by your
service provider, you may need to press the MENU key twice to access the User
Settings menu.
DCX700 High-Definition Digital Set-Top Box • User Guide
365-095-14284 x.1
B
Settings
20