Notes On Operating Your Components - Sony RM-VL700T Operating Instructions Manual

Operating Your Components
with the Remote Commander
(continued)
Notes on operating your
components
About the input select of a TV
Each time t is pressed, the input
is changed in order. It is also
possible to select directly by
pressing one of following Number
buttons while holding t pressed
when more than two VCRs are
connecting.
"t" + "0" : TV tuner
"t" + "1" : VIDEO1
"t" + "2" : VIDEO2
"t" + "3" : VIDEO3
"t" + "4" : VIDEO4
"t" + "5" : VIDEO5
"t" + "6" : VIDEO6
If the above operations do not
work, programme the remote
control signals of your component
in to the Commander using the
Learning function (page 15).
GB
14
About the input select of a VCR
(only for Sony VCR)
Each time a is pressed, the input
is changed in order. It is also
possible to select directly by
pressing one of following Number
buttons while holding a pressed.
"a" + "0" : Tuner
"a" + "1" : LINE1
"a" + "2" : LINE2
"a" + "3" : LINE3
"a" + "4" : LINE4
"a" + "5" : DV in
When you use a Sony VCR, the
above commands are preset. For
other brands, it is possible to
"teach" the above sequential
button operations using the
Learning function (see page 15).