Basic operations (continued)
To turn off the power
1
Press the STANDBY/ON button, for 1 second.
• The ON indicator lights up orange and the lamp turns off. (About 1 minute later), the fan stops and the
indicator blinks orange.
• Press the STANDBY/ON button for short time (less than 1 second), the projector do not set in standby
mode.
2
Turn the MAIN POWER switch of the projector off. [
3
Turn the lens cover lever up.
• Lens cover closes.
Do not turn off the MAIN POWER switch before pressing the STANDBY/ON button. After
Caution
the STANDBY/ON button is pressed, the fan rotates for about 1 minute to cool the projector.
Do not turn off the MAIN POWER switch during the lamp on because the lamp is damaged.
PLUG & PLAY
This projector complies with VESA DDC1/2B specifications. PLUG & PLAY is a system with computer,
peripherals (including projectors), and operating system.
It works when the projector is connected to DDC (Display Data Channel) ready computer that is running an
operating system software that incorporates plug & play functionality.
(Only RGB 1)
1
2
3
1
STANDBY/ON
MUTE
FOCUS
ZOOM
VOLUME
POSITION ON
LASER
RESET
RIGHT
MENU ON
MOUSE ON
BLANK
TIMER
RGB 1/2
VIDEO 1/2
INPUT
™
: OFF]
13